+91-8076753736[email protected]
logo
logo
-->

Moving Charges And Magnetism

Question
CBSEENPH12047853
Wired Faculty App

A galvanometer acting as a voltmeter should have

  • low resistance in series with its coil

  • low resistance in parallel with its coil

  • high resistance in series with its coil

  • high resistance in parallel with its coil

Solution

C.

high resistance in series with its coil

Voltmeter has high resistance and is always connected in parallel with the circuit. So to convert a galvanometer into voltmeter, a high resistance must be connected in series with it so that is draws negligible current from the circuit. 

                

Some More Questions From Moving Charges And Magnetism Chapter

Two moving coil meters, M1 and M2 have the following particulars:
R1 = 10 Ω   N1 = 30,
A1 = 3.6 x 10–3 m2,  B1 = 0.25 T
R2 = 14 Ω;  N2 = 42,
A2 = 1.8 x 10–3 m2, B2 = 0.50 T
(The spring constants k are identical for the two meters).
Determine the ratio of (a) current sensitivity and (b) voltage sensitivity of M2 and M1.

Mock Test Series

Mock Test Series

NCERT Sample Papers

Entrance Exams Preparation