Semiconductor Electronics: Materials, Devices and Simple Circuits
The thermistors are usually made of
metals with low temperature coefficient of resistivity
metals with high temperature coefficient of resistivity
metal oxides with high temperature coefficient of resistivity ‘
semiconducting materials having low temperature coefficient of resistivity.
C.
metal oxides with high temperature coefficient of resistivity ‘
These are devices whose resistance varies quite markedly with temperature mean having high-temperature coefficient of resistivity. [Their name are derived from thermal resistors]. Depending on their composition they can have either negative temperature coefficient or positive temperature coefficient or positive temperature coefficient or positive temperature coefficient characteristics. The negative temperature coefficient types consist of a mixture of oxides of iron, nickel and cobalt with small amounts of other substance. The positive temperature coefficient types are based on barium titanate.
Sponsor Area
Give the truth table and circuit symbol for NAND gate.
A p–n junction (D) shown in the figure can act as a rectifier. An alternating current source (V) is connected in the circuit.
The logic circuit shown below has the input waveforms ‘A’ and ‘B’ as shown. Pick out the correct output waveform.
output is
A working transistor with its three legs marked P, Q and R are tested using a multimeter. No conduction is found between P and Q. By connecting the common (negative) terminal of the multimeter to R and the other (positive) terminal of P or Q, some resistance is seen on the multimeter. Which of the following is true for the transistor?
In the circuit below, A and B represent two inputs and C represents the output. The circuit represents
If in a p-n junction diode, a square input signal of 10V is applied as shown Then the output signal across RL will be
Carbon, silicon and germanium have four valence electrons each. At room temperature which one of the following statements is most appropriate?
A thermocouple is made from two metals, Antimony and Bismuth. If one junction of the couple is kept hot and the other is kept cold then, an electric current will
Sponsor Area
Sponsor Area