Magnetism And Matter
Sponsor Area
Needles N1, N2 and N3 are made of a ferromagnetic, a paramagnetic and a diamagnetic substance respectively. A magnet when brought close to them will
-
attract all three of them
-
attract N1 and N2 strongly but repel N3
-
attract N1 strongly, N2 weakly and repel N3 weakly
-
attract N1 strongly, but repel N2 and N3 weakly
C.
attract N1 strongly, N2 weakly and repel N3 weakly
Sponsor Area
Relative permittivity and permeability of a material are εr and µr, respectively. Which of the following values of these quantities are allowed for a diamagnetic material?
-
εr = 0.5, µr = 1.5
-
εr = 1.5, µr = 0.5
-
εr = 0.5, µr = 0.5
-
εr = 1.5, µr = 1.5
B.
εr = 1.5, µr = 0.5
The length of a magnet is large compared to its width and breadth. The time period of its width and breadth. The time period of its oscillation in a vibration magnetometer is 2 s. The magnet is cut along its length into three equal parts and three parts are then placed on each other with their like poles together. The time period of this combination will be
-
2 s
-
2/3 s
-
2√3 s
-
2/√3 s
B.
2/3 s
The time period of oscillations of magnet
where I = moment of inertia of magnet = mL2/12 (m is being the mass of magnet)
M = pole strength × L When the three equal parts of magnet are placed on one another with their like poles together, then
The materials suitable for making electromagnets should have
-
high retentivity and high coercivity
-
low retentivity and low coercivity
-
high retentivity and low coercivity
-
low retentivity and high coercivity
B.
low retentivity and low coercivity
Electromagnets are made of soft iron. The soft iron has high retentivity and low coercivity.
Two long conductors, separated by a distance d carry current I1 and I2 in the same direction. They exert a force F on each other. Now the current in one of them increased to two times and its direction reversed. The distance is also increased to 3d. The new value of the force between them is
-
−2F
-
F/3
-
−2F/3
-
-F/3
C.
−2F/3
Force acting between two current carrying conductors
where d = distance between the conductors,
l = length of each conductor
Sponsor Area
Mock Test Series
Mock Test Series



